Transparent White Color 100% Pure PTFE Hollow Hose Tubing 4*6 Mm Use For Car Parts Control Cable
Description
extruded pipe and molded pipe using PTFE suspension polymerization process. In the known plastic PTFE has good chemical resistance and dielectric properties.
PTFE pusher tube selection Dispersion of PTFE resin made by plunger processing. It has the best chemical resistance and electrical properties in known plastics.
Specification
| Type | Outside Diameter(mm) | Inside Diameter(mm) | Length(mm) |
| PTFE Extruded Tube | 13 ~ 213 | 5.2 ~ 196 | 500 ~ 4000 |
| PTFE Molded Tube | 30 ~ 1323 | 10 ~ 1217 | 100 ~ 300 |
| PTFE Press Tube | 0.2 ~ 25 | 0.1 ~ 23 | In rolls |
Main Properties
| Properties | Unit | Result |
| Apparent Density | g/cm3 | 2.10 ~ 2.30 |
| Tensile Strength | Mpa | 18 |
| Elongation At Break | % | 230 |
Application
widely used in machinery, chemical, aviation, electrical and electronics, defense industry, cutting-edge technology, medical, wire insulation sheathing, corrosive liquid medium pipe line, and health and electrical insulation and other fields.
Advantage
High and low temperature resistance
-180~220℃
Not sticky, waterproof, oilproof
Security and insulation
Under 60HZ60MHZ, dielectric constant is 2.1.
Even if firing, and it will still insulate.
Volume resistance > 10^18Ωm
Surface resistance > 2 X 10^13Ω
Voltaic Arc >165 seconds, insulation
Only under high temperature, fluorine and alkalis will have chemical reaction, no reaction with all of other thick
and thin inorganic acid, alkali, ester.
Low water absorption < 0.01%
Non inflammability
Non inflammability in air (oxygen index > 95 vol.%)
Non hazardous
With physical inertia
High transparency
Loest refractive index in plastic material
Weather resistance
Under ozone and sunshine for long time
Easy to process for second time
Self-close, self joining, flanging, and it can make into coil pipe
Special thin wall thickness PTFE tube with wall thickness 0.5 mm, 1 mm, 1.5 mm, 2 mm
| Inner diameter | WT=0.5mm | O.D.(mm) WT=1mm | O.D.(mm) WT=1.5mm | O.D.(mm) WT=2.0mm |
| 1 | 2±0.1 | 3±0.1 | 4±0.1 | 5±0.1 |
| 2 | 3±0.1 | 4±0.1 | 5±0.1 | 6±0.1 |
| 3 | 4±0.1 | 5±0.1 | 6±0.1 | 7±0.1 |
| 4 | 5±0.1 | 6±0.1 | 7±0.1 | 8±0.1 |
| 5 | 6±0.1 | 7±0.1 | 8±0.1 | 9±0.1 |
| 6 | 7±0.1 | 8±0.1 | 9±0.1 | 10±0.1 |
| 7 | 8±0.1 | 9±0.1 | 10±0.1 | 11±0.1 |
| 8 | 9±0.1 | 10±0.1 | 11±0.1 | 12±0.1 |
| 9 | 10±0.1 | 11±0.2 | 12±0.2 | 13±0.2 |
| 10 | 11±0.2 | 12±0.2 | 13±0.2 | 14±0.2 |
| 11 | 12±0.2 | 13±0.2 | 14±0.2 | 15±0.2 |
| 12 | 13±0.2 | 14±0.2 | 15±0.2 | 16±0.2 |
| 14 | 15±0.2 | 16±0.2 | 17±0.2 | 18±0.2 |
Features
1 . Chemical insert
2 . High temperature resistance
3 . Continuous operating
4 . Temperature:-80℃-260℃
5 . Corrosion resistance(acid/alkali resistance, chemical reagents oil-proof), most of the chemicals and solvents, shown inertia, capability strong acid strong base water and various organic solvents.
6 . High pressure resistance
7 . High and low temperature and the use temperature of 250℃
8 . Good mechanical toughness, even if the temperature dropped to -196℃,can also keep 5% of elongation rate
9 . Climate resistance, plastics has the aging
10 . High lubrication is the solid material in the lowest coefficient of friction
11 . No adhesive is the solid material in the smallest surface tension, adhesion is not any substance
Package
Product Photos
Product Tags:
|
|
Waterproof Extruded Transparent 4x6mm PTFE Hollow Bar Images
|
